iris AiO Gen 2

The instrument that delivers

iris AiO Gen 2 is the second-generation all-in-one instrument: pitot and static connect at the back, and airspeed, altitude and vertical speed come out the front — on a fully round LCD with no covered area. Over the CAN bus it shares its data with every other device in the panel.

Completely configurable

Configure the face in the built-in Wi-Fi configurator from any phone, tablet or computer: single readout, combined ASI + ALT + VSI, or pages you flip through with the rotary knob. Speed arcs, VNE red line and units follow your aircraft’s flight manual, and the configuration can be locked with a password for club aircraft.

Technical details

• Standard 57mm cut-out — drop-in replacement for a Gen 1 iris or an analogue instrument
• Rotary knob for QNH, pages and menus
• Optional outside air temperature (OAT) probe
• Built-in backup battery, at least 3 hours
• 9–30 V DC, CAN bus, firmware updates over Wi-Fi

Grows with your panel

Pair it with an iris Display Gen 2 for a dedicated airspeed indicator and a dedicated altimeter, or feed any LX navigation CAN system.

Configure and calibrate it yourself

The configuration portal is built into the instrument: connect over Wi-Fi from any phone, tablet or computer and set the face, the arcs, the units and the limits — no CAN2WiFi or any other hardware needed. The same portal calibrates the instrument’s airspeed: IAS, TAS and CAS.