iris AiO Gen 2 Display

The same face, without the sensors

iris Display Gen 2 has the same fully round LCD and the same built-in Wi-Fi configurator as the AiO — but no pitot/static connection. It shows what the CAN bus already knows: airspeed, altitude, G-load, GPS, whatever your system currently measures.

Or completely on its own

Two functions need no CAN partner at all: enable the G-force function and it is a standalone G-meter; connect an external GNSS receiver (GPS mouse) to the RS232 port and it is a standalone chrono with GPS data.

Where it fits

• A second display for an iris AiO Gen 2 — dedicated airspeed indicator plus dedicated altimeter
• A repeater for the rear seat or second pilot — one CAN cable, every readout mirrored
• An extra display for IRIS EFIS, IRIS EFIS Pro, Era or any LX navigation CAN device
• A standalone G-meter, or a standalone chrono with an external GNSS receiver

In the panel

• Standard 57mm cut-out, fully round LCD
• Built-in backup battery, at least 3 hours
• 9–30 V DC, CAN bus, RS232 for external GNSS, firmware updates over Wi-Fi

Configure it yourself

The configuration portal is built into the instrument: connect over Wi-Fi from any phone, tablet or computer and set the face, the units and the limits — no CAN2WiFi or any other hardware needed.